World Library  
Flag as Inappropriate
Email this Article

Rope splicing

Article Id: WHEBN0001095160
Reproduction Date:

Title: Rope splicing  
Author: World Heritage Encyclopedia
Language: English
Subject: Knot, Rope, Eye splice, Fid, Ropework
Collection: Splices
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Rope splicing

A line eye-spliced to a snap shackle.
Three splices. Top to bottom: eye splice, short splice and end splice. This is a practice rope, all splices are finished but not all ends are cut and some helper tapes are still present.

Rope splicing in ropework is the forming of a semi-permanent joint between two ropes or two parts of the same rope by partly untwisting and then interweaving their strands. Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or for joining two ropes together.[1] Splices are preferred to knotted rope, since while a knot typically reduces the strength by 20–40%,[2] a splice is capable of attaining a rope's full strength.[3] However, splicing usually results in a thickening of the line and, if subsequently removed, leaves a distortion of the rope. Most types of splices are used on 3 strand rope, but some can be done on 12 strand or greater single braided rope as well as most double braids.

Contents

  • Types of splices 1
  • Splicing tools 2
  • See also 3
  • References 4
  • External links 5

Types of splices

  • back splice (also called an end splice) – A splice where the strands of the end of the rope are spliced directly back into the end without forming a loop. It is used to finish off the end of the rope to keep it from fraying. The end of the rope with the splice is about twice the thickness of the rest of the rope. With nylon and other plastic materials, the back splice is often no longer used; the rope strands are simply fused together with heat to prevent fraying.[4]
    An unfinished cut splice
  • cut splice (originally called cunt splice) – A splice similar to the eye splice. It is typically used for light lines (e.g., the log-line) where a single splice would tend to come undone, the rope being frequently wet.[5] It makes a very strong knot. A cut splice is a join between two ropes, made by side splicing the ends slightly apart, to make an eye in the joined rope which lies shut when the rope is taut. Its original name was bowdlerised to "cut splice".
  • eye splice – A splice where the working end is spliced into the working part forming a loop.
  • ring splice – Attached the working end of a rope to a ring or clew.[6]
  • chain splice – Attached the working end of a rope to a chain.[7]
  • figure-eight "splice" knot- A splice-like bend knot used for joining two ropes.
  • horseshoe splice – A cut splice where the two sides of the loop are of unequal length.
  • long splice – A splice used to join two rope ends forming one rope the length of the total of the two ropes. The long splice, unlike most splice types, results in a splice that is only very slightly thicker than the rope without the splice, but sacrifices some of the strength of the short splice. It does this by replacing two of the strands of each rope end with those from the other, and cutting off some of the extra strands that result. The long splice allows the spliced rope to still fit through the same pulleys, which is necessary in some applications.[8]
A short splice, with ends whipped
  • short splice – Also a splice used to join the ends of two ropes, but the short splice is more similar to the technique used in other splices and results in the spliced part being about twice as thick as the non spliced part, and has greater strength than the long splice. The short splice retains more of the rope strength than any knots that join rope ends.[9]
  • side splice – A splice in which the end of one rope is joined to the midsection of another. For example, the cut splice (above) is composed of two side splices, with each line's end side spliced to the standing part of the other.

Splices are often tapered to make the thicker splice blend into the rest of the line. There are two main types of tapering, the standard and the "West Coast Taper".

  • Standard tapers progressively remove a portion of each remaining strand—one-third at a time is typical, resulting in a taper of two additional tucks beyond the splice—thus making each successive tuck produce a narrower splice. This is only practical with laid-lines, i.e., those made up of numerous strands laid side by side.
  • West Coast taper (also known as a Fisherman's Taper) is effected by extra-tucks of entire strands, such that the second strand is interweaved one more time than the first and the third is interweaved an additional time after the second.

Splicing tools

A fid is a hand tool made from wood, plastic, or bone and is used in the process of working with rope. A variety of fid diameters are available depending on the size of rope being used. Styles of fid designs include:[10]

  • Swedish fid is conical instrument with a somewhat long taper.
  • Tubular fid aid in splicing double-braided rope.
  • Uni-fid needed to splice braid with a parallel core.

A Marlinspike is a tool, commonly part of a sailor's pocketknife, used to separate strands of rope from one another. A Marlinspike is usually made of steel, between 3 inches and 5 feet long, with a tip shaped like a duck's bill.[11]

See also

References

  1. ^ Beech, Frank (2005). Splicing Bell Ropes Illustrated (first ed.). Central Council of Church Bell Ringers. pp. 1–32.  
  2. ^ Neil Montgomery, Single Rope Techniques (Natl Speleological Society, June 1982), p. 1.
  3. ^ Merry, Barbara (2001). The Splicing Handbook (second ed.). International Marine. p. 1.  
  4. ^ Merry, Barbara (2001). The Splicing Handbook (second ed.). International Marine. p. 31.  
  5. ^ William Falconer, Universal Dictionary of the Marine (London: Thomas Cadell, 1780), 1243.
  6. ^ Merry, Barbara (2001). The Splicing Handbook (second ed.). International Marine. p. 27.  
  7. ^ Toss, Brion (1998). The Complete Rigger's Apprentice. International Marine. p. 89.  
  8. ^ Toss, Brion (1998). The Complete Rigger's Apprentice. International Marine. p. 94.  
  9. ^ Merry, Barbara (2001). The Splicing Handbook (second ed.). International Marine. p. 29.  
  10. ^ Merry, Barbara (2001). The Splicing Handbook (second ed.). International Marine. pp. 12–13.  
  11. ^ Merry, Barbara (2001). The Splicing Handbook (second ed.). International Marine. p. 13.  

External links

  • Braided eye splice!
  • Eye Splice Animation Using Rope – with Discussion
  • New England Ropes Splicing Guide
  • (1794) from The Maritime History Virtual ArchivesThe Elements and Rigging and SeamanshipSteel:
  • A. Hyatt Verrill Knots, Splices and Rope Work from Project Gutenberg
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.