The rhombus has a square as a special case, and is a special case of a
kite and
parallelogram.
In Euclidean geometry, a rhombus(◊), plural rhombi or rhombuses, is a simple (nonselfintersecting) quadrilateral all of whose four sides have the same length. Another name is equilateral quadrilateral, since equilateral means that all of its sides are equal in length. The rhombus is often called a diamond, after the diamonds suit in playing cards which resembles the projection of an octahedral diamond, or a lozenge, though the former sometimes refers specifically to a rhombus with a 60° angle (see Polyiamond), and the latter sometimes refers specifically to a rhombus with a 45° angle.
Every rhombus is a parallelogram and a kite. A rhombus with right angles is a square.^{[1]}^{[2]}
Contents

Etymology 1

Characterizations 2

Basic properties 3

Area 4

Inradius 5

Dual properties 6

Other properties 7

As a Varignon parallelogram 8

As the faces of a polyhedron 9

See also 10

References 11

External links 12
Etymology
The word "rhombus" comes from Greek ῥόμβος(rhombos), meaning something that spins,^{[3]} which derives from the verb ρέμβω (rhembō), meaning "to turn round and round".^{[4]} The word was used both by Euclid and Archimedes, who used the term "solid rhombus" for two right circular cones sharing a common base.^{[5]}
Characterizations
A simple (non selfintersecting) quadrilateral is a rhombus if and only if it is any one of the following:^{[6]}^{[7]}

a quadrilateral with four sides of equal length (by definition)

a quadrilateral in which the diagonals are perpendicular and bisect each other

a quadrilateral in which each diagonal bisects two opposite interior angles

a parallelogram in which a diagonal bisects an interior angle

a parallelogram in which at least two consecutive sides are equal in length

a parallelogram in which the diagonals are perpendicular (an orthodiagonal parallelogram)
Basic properties
Every rhombus has two diagonals connecting pairs of opposite vertices, and two pairs of parallel sides. Using congruent triangles, one can prove that the rhombus is symmetric across each of these diagonals. It follows that any rhombus has the following properties:
The first property implies that every rhombus is a parallelogram. A rhombus therefore has all of the properties of a parallelogram: for example, opposite sides are parallel; adjacent angles are supplementary; the two diagonals bisect one another; any line through the midpoint bisects the area; and the sum of the squares of the sides equals the sum of the squares of the diagonals (the parallelogram law). Thus denoting the common side as a and the diagonals as p and q, in every rhombus

\displaystyle 4a^2=p^2+q^2.
Not every parallelogram is a rhombus, though any parallelogram with perpendicular diagonals (the second property) is a rhombus. In general, any quadrilateral with perpendicular diagonals, one of which is a line of symmetry, is a kite. Every rhombus is a kite, and any quadrilateral that is both a kite and parallelogram is a rhombus.
A rhombus is a tangential quadrilateral.^{[8]} That is, it has an inscribed circle that is tangent to all four sides.
Area
The height h is the perpendicular distance between any two nonadjacent sides, or the diameter of the circle inscribed.
As for all parallelograms, the area A of a rhombus is the product of its base and its height (h). The base is simply any side length a:

A = a \cdot h .
The area can also be expressed as the base squared times the sine of any angle:

A = a^2 \cdot \sin \alpha = a^2 \cdot \sin \beta ,
or as half the product of the diagonals p, q:

A = \frac{p \cdot q}{2} ,
or as the semiperimeter times the radius of the circle inscribed in the rhombus (inradius):

A = 2a \cdot r .
Another way, in common with parallelograms, is to consider two adjacent sides as vectors, forming a bivector, so the area is the magnitude of the bivector (the magnitude of the vector product of the two vectors), which is the determinant of the two vectors' Cartesian coordinates: A = x_{1}y_{2} – x_{2}y_{1}.^{[9]}
Inradius
The inradius (the radius of the incircle), denoted by r, can be expressed in terms of the diagonals p and q as:^{[8]}

r = \frac{p \cdot q}{2\sqrt{p^2+q^2}}.
Dual properties
The dual polygon of a rhombus is a rectangle:^{[10]}

A rhombus has all sides equal, while a rectangle has all angles equal.

A rhombus has opposite angles equal, while a rectangle has opposite sides equal.

A rhombus has an inscribed circle, while a rectangle has a circumcircle.

A rhombus has an axis of symmetry through each pair of opposite vertex angles, while a rectangle has an axis of symmetry through each pair of opposite sides.

The diagonals of a rhombus intersect at equal angles, while the diagonals of a rectangle are equal in length.

The figure formed by joining, in order, the midpoints of the sides of a rhombus is a rectangle and vice versa.
Other properties
As a Varignon parallelogram
The Varignon parallelogram of an equidiagonal quadrilateral is a rhombus.^{[11]}
As the faces of a polyhedron
A rhombohedron is a threedimensional figure like a cube, except that its six faces are rhombi instead of squares.
The rhombic dodecahedron is a convex polyhedron with 12 congruent rhombi as its faces.
The rhombic triacontahedron is a convex polyhedron with 30 golden rhombi (rhombi whose diagonals are in the golden ratio) as its faces.
The great rhombic triacontahedron is a nonconvex isohedral, isotoxal polyhedron with 30 intersecting rhombic faces.
The rhombic hexecontahedron is a stellation of the rhombic triacontahedron. It is nonconvex with 60 golden rhombic faces with icosahedral symmetry.
The rhombic enneacontahedron is a polyhedron composed of 90 rhombic faces, with three, five, or six rhombi meeting at each vertex. It has 60 broad rhombi and 30 slim ones.
The trapezorhombic dodecahedron is a convex polyhedron with 6 rhombic and 6 trapezoidal faces.
The rhombic icosahedron is a polyhedron composed of 20 rhombic faces, of which three, four, or five meet at each vertex. It has 10 faces on the polar axis with 10 faces following the equator.
See also
References

^ Note: Euclid's original definition and some English dictionaries' definition of rhombus excludes squares, but modern mathematicians prefer the inclusive definition.

^ Weisstein, Eric W., "Square", MathWorld. inclusive usage

^ ῥόμβος, Henry George Liddell, Robert Scott, A GreekEnglish Lexicon, on Perseus

^ ρέμβω, Henry George Liddell, Robert Scott, A GreekEnglish Lexicon, on Perseus

^ The Origin of Rhombus

^ Zalman Usiskin and Jennifer Griffin, "The Classification of Quadrilaterals. A Study of Definition", Information Age Publishing, 2008, pp. 5556.

^ Owen Byer, Felix Lazebnik and Deirdre Smeltzer, Methods for Euclidean Geometry, Mathematical Association of America, 2010, p. 53.

^ ^{a} ^{b} Weisstein, Eric W., "Rhombus", MathWorld.

^ WildLinAlg episode 4, Norman J Wildberger, Univ. of New South Wales, 2010, lecture via youtube

^ de Villiers, Michael, "Equiangular cyclic and equilateral circumscribed polygons", Mathematical Gazette 95, March 2011, 102107.

^ de Villiers, Michael (2009), Some Adventures in Euclidean Geometry, Dynamic Mathematics Learning, p. 58, .
External links

Parallelogram and Rhombus  Animated course (Construction, Circumference, Area)

Rhombus definition. Math Open Reference With interactive applet.

Rhombus area. Math Open Reference Shows three different ways to compute the area of a rhombus, with interactive applet.
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.